Dry Verge by Revive Roofing & Repairs in Stirling

Family Run Roofers in Stirling

Dry Verge in Stirling

Family run and fully insured, with over 20 years' experience fitting interlocking dry verge to gable ends, plus free surveys and a 24-hour emergency service.

Over 20 Years' Experience
Family Run & Fully Insured
Free Quotes & Surveys
24 Hour Emergency Service

0800 158 8508

Get Your Quote

Fill out the form below, and we will get back to you swiftly.

Over 20 Years' Experience
Family Run & Fully Insured
Free Quotes & Surveys
24 Hour Emergency Service

Dry Verge

Dry Verge Caps for Gable Ends

The verge is the sloping edge of the roof at a gable end, where the last tiles are usually bedded in mortar on an undercloak. Side winds and driving rain crack that mortar until it falls away and the edge tiles loosen. A dry verge is the right call on most interlocking concrete tile roofs once the mortar starts to fail.

Interlocking caps fixed into the ends of the tile battens
Closes the gaps birds and draughts use to get in
Slate, plain tile and bargeboard gables finished another way
Each unit locks into the one below it

0800 158 8508 Get Your Free Quote

Over 20 yearsfamily run, fully insured

Why Choose Us

Why Choose Us for Dry Verge

Dry Verge work by Revive Roofing & Repairs

Over 20 years

A family run company with over 20 years' experience

You deal directly with the family that runs the business, from the free survey to the final review of the completed work.

Suitability checked first

Our free survey confirms your tiles and gable detail will take a verge cap before we quote, rather than pricing dry verge from a photo alone.

Batten ends made sound

Every cap is screwed into a batten end, so rotten or short battens are cut back, treated or renewed before any unit goes on.

Built for side winds

Gable edges take wind and driving rain from the side. Interlocking caps close the edge tiles so a Scottish gale has nothing to lift.

Experienced and fully insured

Over 20 years' experience in home improvements and full insurance cover gables above conservatories, extensions and garages as well as straightforward ones.

Ready for a free quote on your roof?

Call us or send the quote form, and we will arrange your free survey at a time that suits you.

0800 158 8508 Get Your Quote

Close view of dry verge work in progress

What’s Included

What Our Dry Verge Service Includes

Old verge mortar and loose pointing removed
Edge tiles checked, reset or replaced
Batten ends trimmed and treated as needed
Interlocking verge caps screwed to battens
Eaves starter piece and ridge end cap
Caps in a colour picked to suit your tiles

Get Your Free Quote

Our Work

Our Dry Verge Work

View the gallery

When To Call Us

Signs You Need Dry Verge

The signs homeowners most often notice before they contact us about this work.

Mortar falling from the gable

Chunks of verge mortar on the drive or in the garden mean the bedding under the edge tiles has given way.

Loose tiles at the edge

End tiles that rattle or lift in strong wind are no longer held, and losing one opens the roof to rain.

Birds nesting in the verge

Gaps along the gable are an easy way in for birds, which then nest in the loft or the wall cavity.

Cold draughts in the loft

Open verges let wind blow straight into the roof space, making the loft colder and the rooms below harder to heat.

Pricing

Dry Verge Costs

Every roof is different, so we price yours after a free survey. These are the factors that move the figure most for this kind of work.

0800 158 8508

Number of gables

Each gable has two verges, so a house with several gables, or a garage gable as well, means more units and more time.

Length of each verge

A steep or long rafter run needs more caps than a short, shallow gable.

Edge tiles and battens

Broken edge tiles or rotten batten ends have to be replaced before verge units can be fixed securely.

Reaching the gable

Gable ends often need scaffold, especially where a conservatory or extension sits underneath them.

How It Works

How Our Dry Verge Service Works

Step 1

Check the gable

We look at the tile type, the batten ends and the state of the mortar and undercloak, to confirm dry verge is suitable for your roof.

Step 2

Clear the old verge

Loose mortar is knocked out along the full gable, edge tiles are lifted or reset, and batten ends are cut back square where they need it.

Step 3

Fit the verge units

Working up from a starter piece at the eaves, each cap is fitted over its edge tile and screwed into the batten end, locking into the one below.

Step 4

Finish and review

A ridge end cap closes the top of the verge on each side and every unit is checked for a firm fix. Before we leave, we review the completed work with you on site, then confirm everything has been done as agreed.

Products we fit include

Reviews

Customer Reviews

Read what customers have written about our work on the profiles below, or see recent jobs on our Facebook page.

FAQs

Dry Verge FAQs

How do I know my verge needs replacing?

Mortar fragments on the drive or in the garden below a gable, draughts or daylight in the loft near the gable wall, and edge tiles that rattle in the wind all point to a failing verge. We confirm the condition up close when we survey the roof.

Can dry verge be fitted to any roof?

No. It is designed for tiles that take a verge cap, which means most concrete interlocking tiles. Some slate roofs, plain tiles and gables with a projecting bargeboard need a different finish. That is why we check the roof before recommending it, rather than quoting from a photo alone.

How long does dry verge take to fit?

Once access is in place, the verges on a typical gable are often done within a day. More gables, longer verges, or edge tiles and battens that need repair add time. We let you know what to expect when we send the quote, so you can plan around it.

What affects the cost of dry verge?

The number and length of verges, the condition of the edge tiles and batten ends, and how the gable is reached. A single gable over a lawn is straightforward; one above a conservatory needs more thought about access. If the ridge is failing too, doing both together saves a second set of access.

How do I get a dry verge quote?

Ring us, or send the quote form saying how many gables the house has. The survey and quote are free: we check that dry verge suits your tiles, then send a written quote with the cap colour we propose and any tile or batten repairs listed separately.

Get In Touch

Can’t find the answer you’re looking for?

Get in touch with the team today.

Call the team0800 158 8508
Emailinfo@reviveroofingandrepairs.co.uk
Find usYard 7, Bandeath Industrial Estate, Stirling, FK7 7NP

Contact the team

Related Services

Related Roofing Services